Job.boJob.bo

Heating Air Conditioning Specialist

EKSTRA RESOURCES LIMITEDLagosroam-ngopublikowano 26.06.2026
Przejdź do oferty
Wymagane:ExpressQA/TestSeniorLead

About the company

EKSTRA RESOURCES LIMITED Engineering, Fire Safety, MEP & Industrial Automation Solutions

1. ABOUT ERL Ekstra Resources Limited (ERL) is an indigenous Nigerian engineering contractor delivering instrumentation, electrical, fire and gas safety, MEP, mechanical, industrial automation, systems integration and commissioning solutions.

EKSTRA RESOURCES LIMITED Engineering Safety. Delivering Confidence.

Your tasks

PADAH LNG TERMINAL EXPANSION PROJECT Senior Engineering Leadership, Construction, Installation, Testing & Commissioning

Project: Padah LNG Terminal — 5.7 MMTPA Expansion Project

In anticipation of the full award of the Padah LNG instrumentation installation package, ERL is preparing a dedicated team for installation, inspection, testing, pre-commissioning, systems integration, commissioning and handover.

Our philosophy: Build to specification. Inspect before release. Test before acceptance. Document every activity. Close every punch item. Deliver a complete, verifiable installation.

2. ANTICIPATED PROJECT SCOPE Execution will be governed by the awarded BOQ, approved drawings, specifications, material schedules and procedures. Subject to the final contract, activities include:

A. Instrumentation Installation & Hook-Up

  • Mounting, alignment, tagging and installation of instruments, transmitters, switches, gauges and accessories.
  • Installation of brackets, manifolds, supports, junction boxes and local panels.
  • Instrument hook-ups, impulse lines, SS316 tubing and pneumatic connections.
  • Verification of instrument tags, orientation, process connections, clearances and data sheets.

B. Cable Installation & Termination

  • Cable trays, ladders, supports and accessories where specified.
  • Cable pulling, laying, dressing, segregation, tagging and securing.
  • Glanding, ferruling and termination at instruments, junction boxes, marshalling cabinets and control panels.
  • Earthing, bonding, shielding, continuity and insulation-resistance testing.

C. Calibration & Loop Verification

  • Bench/field calibration using suitable calibrated reference equipment.
  • Range, zero, span, alarm and output verification.
  • HART configuration, as-found/as-left records and calibration traceability.
  • Point-to-point checks, loop checks, signal verification and end-to-end functional testing.

D. Tubing & Pneumatic Works

  • Instrument air tubing, impulse lines, supports and fittings.
  • Tube cutting, bending, fitting assembly and installation to approved drawings.
  • Inspection of routing, supports, connections and mechanical protection.
  • Leak, pressure and cleanliness testing where specified.

E. Systems Integration & Commissioning

  • DCS, PLC, ESD and F&G interface verification.
  • I/O checks, marshalling, communications, alarm and functional testing.
  • Cause & Effect, interlock and voting-logic validation where applicable.
  • Integrated testing, SAT, OEM coordination and commissioning support.

Safety-system changes, bypasses and overrides must be performed only by authorised personnel under approved procedures.

Where included in the awarded scope

  • Detector installation, alignment, calibration and functional testing.
  • F&G panel interfaces, alarms, voting logic and Cause & Effect verification.
  • Suppression release circuits and associated field-device testing.
  • Approved discharge, inhibit and shutdown interface tests.

Mechanical suppression equipment, cylinder banks, pressure piping and discharge nozzles will be included only where contractually confirmed.

G. Pre-Commissioning & Handover

  • Installation inspections, work-pack completion and test-pack preparation.
  • Calibration, cable testing, loop folders and system completion records.
  • Punch-list classification, tracking and closure.
  • Red-line drawings, as-builts, calibration certificates and handover dossiers.
  • Client inspections, SAT, final acceptance and formal turnover.

The team must

  1. Reconcile assigned quantities against the BOQ, instrument index, cable schedules and approved drawings.
  2. Develop work packs and installation sequences for defined areas and systems.
  3. Establish productivity targets for installation, tubing, cabling, termination, calibration and testing.
  4. Track daily quantities, cumulative progress, outstanding work and forecast completion.
  5. Coordinate materials, permits, tools, equipment and work-front readiness.
  6. Raise design discrepancies, shortages and scope changes through approved procedures.
  7. Maintain traceable inspection and test records against tags, cables and equipment.
  8. Ensure all completed work is inspected, tested, documented and formally released.

Physical installation alone does not constitute completion. Inspection, testing, documentation, acceptance and turnover are integral to delivery.

5. TECHNICAL WORKFORCE Additional recruitment will cover instrumentation technicians/fitters, cable-pulling and termination technicians, electrical/control technicians, tubing and hook-up technicians, calibration and loop-check technicians, F&G technicians, QA/QC inspectors, HSE officers, material controllers, storekeepers, document controllers, assistants and other approved trades.

Final headcount, shift allocation and crew composition will follow the awarded BOQ, work fronts, productivity assumptions, schedule and commissioning sequence.

9. HSE, QUALITY & INTEGRITY All personnel must comply with permits, risk assessments, isolation procedures, PPE, environmental controls, inspection requirements and client rules. Safety takes precedence over production targets. Falsification of calibration, inspection or test records is unacceptable. Restricted work and safety-system modifications require authorised personnel.

Requirements

We seek experienced engineers, construction leaders, supervisors, inspectors and technicians capable of delivering safely, efficiently and to approved drawings, specifications, ITPs and client requirements.

Leads schedule, cost, resources, BOQ control, subcontractors, client coordination, quality, HSE, commissioning and closeout. Requires relevant engineering qualifications, 12+ years' EPC/industrial experience and demonstrated leadership of comparable projects. PMP/PRINCE2 and applicable COREN registration preferred or required as appropriate.

Directs installation work fronts, supervisors, technicians, productivity, materials, cable works, tubing and construction interfaces. Requires relevant engineering degree/HND and 10+ years' instrumentation/E&I construction experience.

Controls instrument mounting, hook-ups, impulse lines, tubing, supports, drawing compliance, inspections and field completion. Requires relevant engineering degree/HND and 8–10 years' installation experience.

Manages cable routing, tray works, pulling, segregation, glanding, ferruling, termination, earthing and cable testing. Requires relevant qualification and 8+ years' industrial cable installation experience.

Manages calibration facilities, reference equipment, HART tools, traceability, calibration records, loop checks and end-to-end verification. Requires relevant qualification and 8+ years' calibration/loop-checking experience; ISA or equivalent credentials preferred.

Leads DCS/PLC/ESD/F&G interface verification, I/O checks, communications, approved Cause & Effect tests, SAT and commissioning records. Requires relevant engineering qualification and 10–12 years' systems integration/commissioning experience, with applicable OEM competence.

Oversees detector installation, alignment, calibration, wiring, F&G interfaces, voting logic, functional testing and completion records. Requires relevant engineering qualification and 8–10 years' industrial F&G experience; applicable OEM training required or preferred according to the role.

Implements ITPs, material inspections, traceability, installation inspections, NCRs, calibration records, test packs and final quality dossiers. Requires relevant qualification and 8+ years' EPC quality experience; ISO 9001 auditor and inspection credentials preferred or client-mandated.

Controls PTW, risk assessments, toolbox talks, isolation/LOTO, gas testing, hazardous-area practices, lifting and emergency readiness. Requires relevant qualification, 7–10 years' oil and gas HSE experience and NEBOSH or equivalent; applicable Ex competence required for assigned duties.

Conditional on award of mechanical suppression works. Manages specified cylinder assemblies, piping, valves, supports, pressure/leak tests, enclosure integrity and system interfaces. Requires relevant mechanical/fire protection qualification, 8+ years' experience and applicable OEM/NFPA competence.

Manages BOQ reconciliation, materials, shortages, work-package schedules, manpower loading, productivity and progress reporting. Requires relevant qualification, 7+ years' experience and competence with Primavera P6/MS Project or equivalent tools.

Supervise technicians, installation crews, work permits, daily quantities, inspections, shift handovers and defect closure. Requires relevant technical/trade qualifications and typically 5–8 years' experience.

Candidates must demonstrate relevant qualifications, verifiable industrial experience, drawing and specification interpretation, safe work practices, quality documentation, productivity reporting and effective teamwork. Applicants must distinguish between work personally executed, supervised and supported.

What we offer

The anticipated package includes competitive role-based salary and applicable site allowances. Accommodation, transport, meals or performance incentives will apply only where provided for in the written offer.

Any completion bonus will have defined calculation, eligibility, payment and performance conditions.

How to apply

10. HOW TO APPLY Submit an updated CV, position/reference number, project experience, qualifications, professional registrations and relevant certifications to:

Ekstra Resources Limited Email: info@ekstraresources.com

Subject: Application — [Position Title] — [Reference Number]

Anticipated deadline: 15 November 2026, subject to formal announcement.

Shortlisting may include technical interviews, competency assessments and verification of credentials and references. Recruitment agencies may express interest by prior arrangement.

Other

Location: SPFL Free Zone, Ikot Abasi, Akwa Ibom State, Nigeria

Tenure: Anticipated six-month fixed-term contracts

Work Model: On-site, double-shift/rotational deployment

Status: Advance preparation, subject to contract award.

4. AVAILABLE POSITIONS 1. Project Manager / Construction Project Lead Ref: ERL/PADAH/PM/01

2. Construction Manager — Instrumentation & E&I Ref: ERL/PADAH/CM/02

3. Lead Instrumentation Installation & Hook-Up Engineer Ref: ERL/PADAH/INST/03

4. Lead Cable Installation, Termination & Testing Engineer Ref: ERL/PADAH/CABLE/04

5. Lead Instrument Calibration & Loop-Checking Engineer Ref: ERL/PADAH/CAL/05

6. Lead Systems Integration & Commissioning Engineer Ref: ERL/PADAH/SYS/06

7. Senior Fire & Gas Systems Engineer Ref: ERL/PADAH/FG/07

8. Lead QA/QC & Inspection Engineer — E&I Ref: ERL/PADAH/QA/08

9. Lead HSE & Hazardous-Area Safety Engineer Ref: ERL/PADAH/HSE/09

10. Lead Mechanical Suppression Engineer Ref: ERL/PADAH/SUP/10

11. Materials, Planning & Project Controls Engineer Ref: ERL/PADAH/PC/11

12. Instrumentation, Cable & E&I Supervisors Ref: ERL/PADAH/SUPV/12

8. FIXED-TERM ENGAGEMENT Engagement is project-specific, anticipated at six months, and subject to the final programme, employment agreement and applicable law. Permanent conversion is not automatic. High-performing personnel may be considered for ERL's priority talent roster for future projects, subject to availability and mutual agreement.

11. IMPORTANT NOTICE This is advance recruitment preparation for the anticipated project package. Appointments, mobilisation, staffing, remuneration and scope remain subject to contract award, final BOQ and scope confirmation, and the approved programme.

Execution will be governed by the executed contract, approved BOQ, drawings, specifications, clarifications and authorised instructions.