Safety Supervisor

HYDRO AQUATIC PTE. LTD.Singaporemycareersfuturepublié le 18/11/2026

1\. Main scope of work

A. Daily site safety inspection

  • Conduct daily workplace safety inspections.
  • Check site conditions, access routes and housekeeping.
  • Identify unsafe working conditions and practices.
  • Ensure workers comply with PPE requirements.
  • Check safety barricades, warning signs and traffic control arrangements.
  • Report safety hazards and follow up on corrective actions.

B. Workers' safety management

  • Conduct daily toolbox meetings.
  • Provide safety briefings to workers before commencing work.
  • Ensure workers have the required safety training and certifications.
  • Monitor workers' compliance with safe work procedures.
  • Ensure proper PPE is worn, including safety helmets, safety boots, reflective vests, gloves and eye protection.

C. Machinery and equipment safety

  • Inspect excavators, tipper trucks, compactors and other machinery.
  • Ensure machinery operators have the appropriate licences or qualifications.
  • Check lifting equipment and accessories where applicable.
  • Ensure reversing alarms, flashing lights and other safety devices are working.
  • Monitor safe machinery movement and vehicle operations.

D. Excavation and underground works

  • Check excavation areas before work starts.
  • Ensure underground cable and pipe detection is completed.
  • Verify trial-hole locations and excavation permits.
  • Ensure proper barricades and warning signage.
  • Check excavation stability, shoring and safe access/egress.
  • Monitor workers during manual excavation and cable trenching.
  • Ensure safe working distances between excavators, workers and vehicles.
  • Monitor confined-space work and ensure required controls are in place.

E. Traffic and public safety

  • Ensure proper traffic management plans are implemented.
  • Check road diversion arrangements and traffic signages.
  • Ensure safety cones, barriers and mobile traffic lights are properly positioned.
  • Monitor tipper truck movement and reversing operations.
  • Protect pedestrians and members of the public.

F. Safety documentation and reporting

  • Maintain daily safety inspection checklists.
  • Maintain toolbox meeting attendance records.
  • Check Risk Assessment (RA) and Safe Work Procedures (SWP).
  • Check Method Statements and Permit-to-Work (PTW) requirements.
  • Prepare safety observation and incident reports.
  • Report accidents, near misses and unsafe conditions.
  • Follow up on corrective and preventive actions.

G. Emergency preparedness

  • Ensure first-aid facilities are available.
  • Check fire extinguishers and emergency equipment.
  • Ensure emergency contact numbers are displayed.
  • Familiarise workers with emergency response procedures.
  • Coordinate evacuation and emergency arrangements.

2\. Daily duties checklist

| Timing | Safety supervisor's duties

| Before work | Site inspection and toolbox meeting |

| Morning | Check workers, PPE and machinery |

| During work | Monitor site safety and work activities |

| Afternoon | Conduct safety inspections and rectify hazards |

| End of shift | Check housekeeping and secure worksite |

| Daily | Submit safety reports and inspection records |

  1. Requirements

The Safety Supervisor should understand and comply with the relevant requirements under:

  • Workplace Safety and Health Act.
  • WSH (Construction) Regulations.
  • WSH (Risk Management) Regulations.
  • WSH (Workplace Safety and Health Officers) Regulations.
  • Project-specific safety requirements imposed by the main contractor and relevant authorities.