BIM Modeller
The BIM Modeler builds, updates and maintains digital building models and asset data so the Building Management team can run, maintain and improve the buildings it manages.
Purpose of the role: turn as-built and site information into accurate, data-rich BIM models (Architectural, Structural and MEP) that support operations and maintenance, space management, retrofit works and the Building Management System (BMS).
Key responsibilities
1. BIM modelling and as-built capture
- Develop and maintain Architectural, Structural and MEP (ACMV, electrical, plumbing and sanitary, fire protection, ELV) models of managed buildings in Autodesk Revit or an equivalent tool.
- Convert legacy 2D CAD drawings, as-built records and O&M manuals into coordinated 3D models.
- Use laser scan / point cloud data (e.g. ReCap, Navisworks) and site surveys to check and correct models against actual conditions.
- Model to the Level of Development (LOD) and Level of Information Need set out in the BIM Execution Plan (BEP) or Employer's Information Requirements (EIR).
- Update models after renovations, upgrading works, A&A works, equipment replacement and tenant fit-outs.
2. Asset information and facility management data
- Tag and populate building assets with operational data: asset ID, location, make, model, serial number, capacity, warranty, installation date and maintenance frequency.
- Prepare COBie or client-specified asset registers and keep them in step with the models.
- Produce space and room data sheets for space management, area calculations, lease plans and occupancy planning.
3. BMS and building services support
- Model BMS/IBMS field devices, sensors, controllers, panels and network routes, and map their point names to the corresponding assets.
- Support the BMS team with schematics, equipment location plans and riser diagrams for troubleshooting and energy management.
- Provide model data for digital twin, smart building and energy analytics initiatives where applicable.
4. Coordination and clash detection
- Run clash detection (e.g. Navisworks, Revizto, BIM Collaborate) for retrofit and upgrading works, and issue clash reports.
- Attend coordination meetings and track issues to closure with engineers and contractors.
- Check access and maintenance clearances for plant and equipment.
5. Drawings and documentation
- Produce plans, sections, elevations, schematics, layouts and shop drawings from the model.
- Prepare drawings and model submissions for authority approvals where required (e.g. CORENET X in Singapore).
- Prepare quantity take-offs and schedules to support budgeting and procurement.
6. Information management, standards and QA
- Follow the company BIM standards, naming conventions, templates and the ISO 19650 / SS ISO 19650 workflow.
- Manage files and revisions in the Common Data Environment (CDE), e.g. Autodesk Construction Cloud or SharePoint.
- Run model audits and data validation before each issue; keep the model clean, purged and properly versioned.
- Help maintain Revit families, templates and object libraries for building services.
7. Collaboration and support
- Respond to model and drawing requests from facility managers, engineers and contractors.
- Review and accept BIM handover data from project and contractor teams before it enters operations.
- Coach site and FM staff on using model viewers and asset data.
- Carry out other related duties assigned by the supervisor.
Key deliverables and KPIs
Deliverable
Measure of success
As-built BIM models of managed buildings
Models match site conditions; discrepancies found on site verification under an agreed threshold
Asset register / COBie data
100% of maintainable assets tagged and populated with required fields
Model updates after works
Updated within an agreed turnaround (e.g. 10 working days after completion records are received)
Drawing and model requests
Delivered by the agreed due date; minimal rework from errors
Clash reports for retrofit works
Issued before each coordination meeting; critical clashes resolved before works start
Model QA
Passes internal audit against the BIM standard before each issue
CDE housekeeping
Correct naming, status and revision on all files
Requirements
Qualifications
- Diploma or degree in Architecture, Civil/Structural, Mechanical, Electrical or Building Services Engineering, Facilities Management, or a related field.
- A BIM certification (e.g. BCA Academy BIM courses, Autodesk Certified Professional in Revit) is an advantage.
Experience
- At least 2–3 years of BIM modelling experience, preferably in MEP / building services.
- Exposure to facility management, building operations or as-built modelling is preferred.
- Experience with BMS, ACMV or electrical systems is an advantage.
Software skills
Area
Tools
Modelling (essential)
Autodesk Revit (Architecture, Structure, MEP), AutoCAD
Coordination
Navisworks Manage, Revizto or BIM Collaborate
Point cloud
Autodesk ReCap or equivalent
CDE
Autodesk Construction Cloud / BIM 360, SharePoint
Data
Microsoft Excel, COBie tools; Dynamo or scripting is a plus
FM systems (advantage)
CAFM/CMMS platforms such as Archibus, Maximo or Planon
Competencies
- Sound understanding of building services systems and how buildings are operated and maintained.
- Able to read and interpret architectural, structural and M&E drawings.
- Working knowledge of ISO 19650 and local BIM guides and submission requirements.
- Strong attention to detail and data accuracy.
- Clear communicator who can work with engineers, contractors and non-technical FM staff.
- Organised, able to handle several buildings and requests at once.
Working conditions
- Office hours 9 am to 6 pm.
- Site work may include plant rooms, risers, ceiling voids and rooftops. Safety rules and PPE apply.
- May be deployed to different managed properties as needed.