BIM Modeller

ACUTE AUTOMATION PTE. LTD.Singaporemycareersfuturepublisert 19.11.2026

The BIM Modeler builds, updates and maintains digital building models and asset data so the Building Management team can run, maintain and improve the buildings it manages.

Purpose of the role: turn as-built and site information into accurate, data-rich BIM models (Architectural, Structural and MEP) that support operations and maintenance, space management, retrofit works and the Building Management System (BMS).

Key responsibilities

1. BIM modelling and as-built capture

  • Develop and maintain Architectural, Structural and MEP (ACMV, electrical, plumbing and sanitary, fire protection, ELV) models of managed buildings in Autodesk Revit or an equivalent tool.
  • Convert legacy 2D CAD drawings, as-built records and O&M manuals into coordinated 3D models.
  • Use laser scan / point cloud data (e.g. ReCap, Navisworks) and site surveys to check and correct models against actual conditions.
  • Model to the Level of Development (LOD) and Level of Information Need set out in the BIM Execution Plan (BEP) or Employer's Information Requirements (EIR).
  • Update models after renovations, upgrading works, A&A works, equipment replacement and tenant fit-outs.

2. Asset information and facility management data

  • Tag and populate building assets with operational data: asset ID, location, make, model, serial number, capacity, warranty, installation date and maintenance frequency.
  • Prepare COBie or client-specified asset registers and keep them in step with the models.
  • Produce space and room data sheets for space management, area calculations, lease plans and occupancy planning.

3. BMS and building services support

  • Model BMS/IBMS field devices, sensors, controllers, panels and network routes, and map their point names to the corresponding assets.
  • Support the BMS team with schematics, equipment location plans and riser diagrams for troubleshooting and energy management.
  • Provide model data for digital twin, smart building and energy analytics initiatives where applicable.

4. Coordination and clash detection

  • Run clash detection (e.g. Navisworks, Revizto, BIM Collaborate) for retrofit and upgrading works, and issue clash reports.
  • Attend coordination meetings and track issues to closure with engineers and contractors.
  • Check access and maintenance clearances for plant and equipment.

5. Drawings and documentation

  • Produce plans, sections, elevations, schematics, layouts and shop drawings from the model.
  • Prepare drawings and model submissions for authority approvals where required (e.g. CORENET X in Singapore).
  • Prepare quantity take-offs and schedules to support budgeting and procurement.

6. Information management, standards and QA

  • Follow the company BIM standards, naming conventions, templates and the ISO 19650 / SS ISO 19650 workflow.
  • Manage files and revisions in the Common Data Environment (CDE), e.g. Autodesk Construction Cloud or SharePoint.
  • Run model audits and data validation before each issue; keep the model clean, purged and properly versioned.
  • Help maintain Revit families, templates and object libraries for building services.

7. Collaboration and support

  • Respond to model and drawing requests from facility managers, engineers and contractors.
  • Review and accept BIM handover data from project and contractor teams before it enters operations.
  • Coach site and FM staff on using model viewers and asset data.
  • Carry out other related duties assigned by the supervisor.

Key deliverables and KPIs

Deliverable

Measure of success

As-built BIM models of managed buildings

Models match site conditions; discrepancies found on site verification under an agreed threshold

Asset register / COBie data

100% of maintainable assets tagged and populated with required fields

Model updates after works

Updated within an agreed turnaround (e.g. 10 working days after completion records are received)

Drawing and model requests

Delivered by the agreed due date; minimal rework from errors

Clash reports for retrofit works

Issued before each coordination meeting; critical clashes resolved before works start

Model QA

Passes internal audit against the BIM standard before each issue

CDE housekeeping

Correct naming, status and revision on all files

Requirements

Qualifications

  • Diploma or degree in Architecture, Civil/Structural, Mechanical, Electrical or Building Services Engineering, Facilities Management, or a related field.
  • A BIM certification (e.g. BCA Academy BIM courses, Autodesk Certified Professional in Revit) is an advantage.

Experience

  • At least 2–3 years of BIM modelling experience, preferably in MEP / building services.
  • Exposure to facility management, building operations or as-built modelling is preferred.
  • Experience with BMS, ACMV or electrical systems is an advantage.

Software skills

Area

Tools

Modelling (essential)

Autodesk Revit (Architecture, Structure, MEP), AutoCAD

Coordination

Navisworks Manage, Revizto or BIM Collaborate

Point cloud

Autodesk ReCap or equivalent

CDE

Autodesk Construction Cloud / BIM 360, SharePoint

Data

Microsoft Excel, COBie tools; Dynamo or scripting is a plus

FM systems (advantage)

CAFM/CMMS platforms such as Archibus, Maximo or Planon

Competencies

  • Sound understanding of building services systems and how buildings are operated and maintained.
  • Able to read and interpret architectural, structural and M&E drawings.
  • Working knowledge of ISO 19650 and local BIM guides and submission requirements.
  • Strong attention to detail and data accuracy.
  • Clear communicator who can work with engineers, contractors and non-technical FM staff.
  • Organised, able to handle several buildings and requests at once.

Working conditions

  • Office hours 9 am to 6 pm.
  • Site work may include plant rooms, risers, ceiling voids and rooftops. Safety rules and PPE apply.
  • May be deployed to different managed properties as needed.